Working with 3D Puff Embroidery - Part 4
SuperUser Account
/ Categories: The Basics Blog

Working with 3D Puff Embroidery - Part 4

Embroidering Puff Designs: To Be or Not to Be?

Now that you have learned all about basic puff embroidery, let’s get down to business on more complex details.

To start, let’s talk about the “Rules of Puff”:

Rule Number 1: Always Use Satin Stitches

  1. You should always use satin stitches to get that raised effect.
  2. We use satin stitches because fill stitch (also known as: Tatami, Ceeding) for all intents and purposes will stomp down the foam. This rules out doing most complex shapes.
  3. Remember, embroidery machines will have a limit of 12 mm to 21 mm for the maximum width of satin stitches.

Rule Number 2: Avoid Complex Shapes and Thin Lines

  1. Puff works best with columns, not complex shapes. A complex shape can be a shape with many appendages, or holes. 
  2. Complex shapes are best built with fill stitches, but as you now know, fill stitches will just flatten the image.
  3. Try avoiding thin lines in puff. The thinner the line, the less room there is for capping the ends. The thin lines will push the foam down, so the finished result will have less height than with wider stitches.

Rule Number 3: Think Through All Aspects of Your Foam

  1. Using the wrong foam color will give you inferior results. As you know, no matter what density, foam has a tendency to stick out, which is why we choose the color of foam closest to the top stitching. This makes producing multi-colored puff designs difficult. I recommend staying away from using more than one color of puff, but if you must, here are some guidelines that may help:
  2. Leave approximately a ¼ inch gap between the puff colors. No puzzle pieces. You must be able to cut the foam into simple curved or straight shapes.
  3. Don’t overlap two colors of foam or the output will be undesirable. Instead, pick one color of foam and hope for the best. Also, let our staff know beforehand what you are planning, so we can look for and avoid any potential pitfalls.
  4. Another thing to look out for: avoid overlapped puff shapes on the front seam. Tension from the combined output could result in thread breaks and bird’s nesting in the back.
  5. Stacking or overlapping foam is a no-no.

Rule Number 4: Auto-Split Stitches

  1. Turn off auto-split stitches to get a smooth look. We limit the width of the puff to be under 12 mm for the default maximum length before your machine turns a stitch into a trim. If you know your machine can go greater than that, feel free and let us know how wide the stitch can be.
  2. Another way to prevent wide stitches from becoming trims is the auto-split stitch. We try to avoid using this because it gives an unwanted pattern. Here are some examples of auto- split stitch below.  While fill stitches allow you to go wider, they will result in a flattened product. Using auto-split stitches makes it possible to use satin stitches, but the results will vary.


In the end, the simplest approach will give you the best results. Letters work so well with puff because cutting the shapes into sections won’t be as distracting as with images or complex shapes. Multi-colored puff designs can be tricky, as it is best to not have the colors touching.

If you still have questions, feel free to reach out to our qualified team of experts for advice. We are here to help.

# # #

 Author: Jesse Elliott

Over 30 years of experience in digitizing embroidery and screen printing


Previous Article Working with 3D Puff Embroidery - Part 3
Next Article Why a Knockdown Stitch?
11381 Rate this article:

11 comments on article "Working with 3D Puff Embroidery - Part 4"

Avatar image


Wordle Play's popularity can be due to its ease of use and accessibility. idle breakout

Avatar image

retro goal

The simplest method almost always yields the best results. Puff works well for letters since it is less distracting to cut the shapes into parts than it would be with images or complex objects.

Avatar image

Only Up Game

Prepare yourself, dear interlocutor, for an intellectual odyssey where we shall uncover the secrets of crafting puff embroidery designs that transcend the boundaries of ordinary stitching. In this realm of artistry, we are no longer confined to the mundane constraints of simplicity. Nay, we shall soar upon the wings of creativity, weaving together a tapestry of complexity that captivates the discerning eye.

Avatar image

run 3

This is such a great post! It’s the little things in life that mean the most and make up the larger moments in our lives!

Avatar image


The approach I embraced was the determining element in my final result. geometry dash unblocked

Avatar image


I really like the type of post that is simple so that everyone can understand and everyone can understand the message that the author wants to convey. Your style is unique but it is easy to understand what you want to say in this discussion.

Avatar image


what is 3d?

Avatar image

wordle game

I have prepared the materials you requested and have followed every step you instructed, I am very satisfied with the embroidery I made, this is my first time making it and I feel the product is Made by myself is also very good.

Leave a comment

This form collects your name, email, IP address and content so that we can keep track of the comments placed on the website. For more info check our Privacy Policy and Terms Of Use where you will get more info on where, how and why we store your data.
Add comment

Theme picker

Working with 3D Puff Embroidery - Part 4

Working with 3D Puff Embroidery - Part 4

In this last installment, Jesse Elliott, our digitizing expert takes you through steps to remember when working with 3D puff designs.

Working with 3D Puff Embroidery - Part 3

Working with 3D Puff Embroidery - Part 3

In this third installment, Jesse Elliot, our digitizing expert takes you through the steps of embroidering a 3D puff design.

Gaining Visibility into Satisfaction Rates

Gaining Visibility into Satisfaction Rates

"Rate Your Project" is a feature on your Ignition Drawing Dashboard: Simply click to report your satifsfaction level. 


We offer Exact Sew Outs!

We offer Exact Sew Outs!

We wanted to give you more options to streamline your customer approval process. A lot of our customers resew our orders for customer approval which adds extra days and labor to the approval process. Where? - On the 3rd page...

Continue Reading →

Working with 3D Puff Embroidery - Part 2

Working with 3D Puff Embroidery - Part 2

Jesse Elliot, our digitizing expert, shares his insights in this second installment on how to digitize 3D puff embroidery.